Rate this post


For a variety of reasons, speakers may blow. There should be no cause for such an awful incident to occur if the system is correctly implemented. Small electrical system flaws, on the other hand, can cause havoc. A little knowledge can save you money on unnecessary speaker repair costs, as well as teach you how to get the most out of your system. What are the causes of this issue, and how much does a Blown speaker repair cost?

There are a variety of reasons why speakers may blow. Thermal failure and mechanical failure are the most common causes. However, each of these can be avoided. If you don’t, the cost of repairing a blown speaker might vary greatly depending on the model. They can be inexpensive or quite expensive.

How To Tell If You Have A Blown Speaker

When speaking with a professional, a blown speaker is typically one that has been severely damaged. The speaker may still operate on occasion, but the quality is so poor that you don’t want to use it. Most of the time, it doesn’t function at all. Generally speaking, if your automobile speaker is damaged, you will lose sound. There’s also the possibility that you’ll only hear an unpleasant buzz. A failed speaker can be caused by a variety of factors. It may not even be blown, necessitating thorough inspection before electing to replace them.

Factors That Can Blow Speakers

As a general rule of thumb, there are two causes behind blown speakers. They can be thermally or mechanically blown. If there is one way to prevent both issues, that is avoiding excessive volumes while playing music.

Factors that can cause speakers to blow up

There are two common reasons for blown speakers, as a general rule. They can be blown either thermally or mechanically. If there’s one thing you can do to avoid both problems, it’s to turn down the volume of your music.

What causes mechanical failures?

The cone, an internal component, moves in the wrong direction. It goes forward regardless, although sometimes far faster than it should, causing damage to the materials in its path. Components will fall loose or break, causing the system to fail permanently.

Thermal breakdowns are more difficult to diagnose. They arise when speakers are exposed to greater power than they are capable of handling. Inside the speakers, heat builds up. The glue that holds the pieces together will become brittle, and everything will fall apart.

Simultaneously, too much power will have an impact on the wiring inside the voice coil. When the voice coil is smoked in this manner, there is no sound at all – not even a hissing or buzzing sound.

In all cases, the cause is clear: the device was accidentally operated outside of its specifications. If any of these things happen, the cost of a blown speaker repair will teach you a valuable lesson in upkeep.

Other Factors Aside from Volume

Other technical faults could cause your speakers to blow up. Avoid improvising or getting things done in random services because an unprofessionally built system would cause the same problem. Physical damage and amplifier clipping are both examples of this.

Clipping is more common in amplifier-based systems. The amp is being pushed to its limits, and the waveform tops and bottoms are clipping. As a result, speakers will no longer be able to handle the promised level of power.

When it comes to physical harm, it all stems from a faulty installation. If the grill breaks loose, replace it as soon as possible. Because cones are delicate, they need to be protected.

It’s also possible that the cause is solely due to age. If your speakers are over 14 years old, they may fail due to regular wear and tear. It’s simply the life cycle of such components.

After all, OEM speakers aren’t always comprised of the highest-quality materials, particularly when compared to high-end aftermarket counterparts. The cost of repairing a blown speaker is roughly the same regardless of the source. After all, your speakers have died and will almost certainly need to be replaced.

What To Do When Speakers Blow?

In terms of technology, a blown speaker can be repaired. It may be opened and disassembled into small sections, with the problematic parts being purchased and replaced separately.

Is it worth it? Usually, it isn’t the case.

The cost of repairing a blown speaker is frequently higher than the cost of a new speaker plus labor. Of course, there are some exceptions.

The cost of repairing or replacing your blown automobile speakers will be between $300 and $500. You should expect to invest between $800 and $1,000 to replace the entire sound system with something a little more high-end. If you do decide to buy a new sound system, be sure it’s adequately covered by your auto insurance policy.

You can learn how to fix a blown amp and do it yourself if you are tech-savvy and enjoy mending things. However, it can be time-consuming and frustrating.

For example, if your speaker cone has a dent, such minor concerns can be resolved with a little effort. Just be cautious when working with delicate components. The sound quality may suffer as a result of your work, but your speaker will continue to function and give adequate sound. Everything’s also the satisfaction of doing it yourself and saving a lot of money.

The cost of blown speaker repair will almost certainly be higher if your voice coils are blown. It may be difficult to locate such parts separately, therefore you may need to purchase used speakers and disassemble them instead. You’ll have a lot of spare parts at that point. However, hiring someone to do it might be costly.

However, the majority of consumers will opt to replace the device. When shopping for new speakers, make sure you get the proper kind. Also, figure out what’s causing the problem.

If you choose an aftermarket system, make sure that all of the parts fit together properly. Using a stock system, on the other hand, is more convenient because blown parts may be quickly replaced with direct-fit modules. You should be fine if you keep the volume low and avoid distortions.


To summarize, the Blown Speaker Repair Cost varies greatly from one situation to the next. Unless you enjoy mending things yourself, hiring a professional service is your best bet. Because repairing them is more expensive than replacing them, your best option is to purchase an alternate system and get someone to install it. If you like to accomplish things on your own, your alternatives are more varied. ​





  2. Pingback: How to Play Music on a Car Stereo Without Aux or Bluetooth - all things about bike and more

  3. Pingback: What is fingerboarding? - My blog, my life, my style -


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top